First Time Enrollment of a Hand Punch Supervisor:*

*If you already have another supervisor enrolled, have them sign in first, the start with 4#.  The instructions below are for a Hand Punch that is "clear" of all employees and supervisors.
For free telephone assistance, call 1.800.682.3389

Press Clear, then press Enter.

Press 4 #

See Add Employee,    Press NO (*)

See Add Supervisor ,  Press YES (#)

Enter the Supervisors ID (4 digits), place hand 3 times, following prompts.
Tip: Practice barely moving the hand off the plate.

Enter another person as Supervisor. 

After all supervisors are entered, press # (YES) to go to the next step (and save your work, the press Clear to exit.

How to Enroll Employees:

Once we have enrolled the supervisors and exited, there is another step to adding/deleting supervisors and employees:

From this point forward, it asks for an ID number.  That’s the Supervisor.
 

Press Clear, then press Enter.

Type in the supervisors number
Place supervisors hand. Be sure to touch the pins to make the red lights go out.
Press 4 # and if necessary, press NO (*) until you see Add Employee.
Some models are slightly different.

Follow the prompts.  They will be essentially this:
Enter ID number:  “Mike” would normally use the  last 4 of his SSI number.

Then it will prompt him to place his hand three times.

You can add all your employees at once without going back to enrolling the supervisor each time.

For further assistance, call or email us:
timesource@outlook.com
1  800  682  3389