Home
How to install an Amano MJR signal kit board
 

IT COMES WITH INSTRUCTIONS
The images below are a step-by-step on how to install the Amano MJR Signal Kit control board.  The machine must be unplugged when you do this.  Once this is done, you will need to go in to the program area and set up the duration of the signal and the various days and times that they go off.  Call us for assistance.   Tools needed:  A wire stripper and a very small flat blade screw driver.  Plus 16 to 24 gauge speaker wire.
END RESULT:


 

Now remove the left front “foot“



Thread the wire through that hole


It's done.  Plug it in, now you will set the program times.