Network Setup for Netbell Device
The Netbell is a network-enabled bell controller that operates over your local network without requiring PC-installed software.
Once connected, scheduling is managed through a web browser.
Initial Network Setup
| Step |
Action |
| 1 |
Power on the device |
| 2 |
Connect Ethernet cable to network switch |
| 3 |
Device obtains IP address automatically (DHCP) |
| 4 |
Locate IP address using router or Discover utility |
| 5 |
Enter IP address in web browser to access scheduling |
Key Advantages
- No software installation required
- Access from any computer on the same network
- Operates over intranet (does not require firewall changes)
- Centralized scheduling via browser interface
The system functions entirely within your local network environment. Once accessed through the assigned IP address, schedules can be configured and maintained directly from the web interface.
FAQ
Does the device require internet access?
No. It operates on the local network using DHCP.
How do I find the IP address?
Check your router’s connected device list or use the Discover utility.