Hand Punch Master Reset
Note: Normally, this does not change your modem or network connections.
We recommend that you print this page and save it.

Release and tip the machine forward. You can probably do this with it still connected to the hinge.

See two items:
On left: The power supply plug. In the center, a small white button (a microswitch) which is underneath the ribbon cable, and on top of the circuit board.
Right hand: Press and hold the “Press and hold” the white button. Left hand: Unplug, then 1 second later, plug it back in.
THEN release the white button. You should hear two beeps. If you don’t hear two beeps, repeat this.
Quickly (you have about 5 seconds), press 9 on the keypad. It should say RESET ALL, or reset in progress (something like that). This may take 2 or three tries, but it always works.
This resets the machine. “Cold Boot!”
Tip the machine back up and lock to the wall.
The machine has been cleared. Next:

Hand Punch: Set Time, Date, and ID Length:

Press Clear, then press Enter. Not at the same time.
Press 2 then YES#, No*, No*, then YES# in that order.
Follow the prompts.

Month (01 – 12) #, Date (01 – 31) #, Year (xx) #
0 7 0 4 1 9 = July 4, 2019

Then the time in 0-23 and minutes:
Example: 7:31 AM is 07 # 31 #

Press * until you see SET ID LENGTH = 11 Press ENTER.

Press 4, press #YES. “4” if your people use a 4 digit number.
3 if 3, 5 if 5 digits.. Press # (YES) to save.

Then press CLEAR 2 to 3 times on the upper right to save/ exit.