Icon TimeVue Reports, this is included in the basic system - Amazing Value!
Icon TimeVue Lite 50 employee software
Runs in Windows XP, and Vista32, Vista64, Windows 7 and Windows 8, 10
The basic Icon software for the Icon data terminals and Icon HandPunch systems
Hand Punch users: Does not include HandPunch communications license
See what people are saying about us - click here
TimeSource has been on the market since 1992. Technical support ended on May 28, 2013. Icon and Employee Time Clocks sent out countless emails to all registered users between December 1 and May 28, 2013 regarding this change.
How to replace TimeSource with TimeVue:
1) Make an archive, store on on your computer and also on a thumb drive (copy it over).
2) Disconnect the clock's data cable at the clock, connect it after you have finished this work.
3) From the windows Control Panel, delete the TimeSource program, then delete the files
that come with warnings, it's okay, nothing will go wrong, it's an old program.
4) Right-click on START (find it at the lower left of your monitor), select EXPLORE.
5) Restart your computer.
6) Insert the TimeVue CD and run the installation. Open a web browser, you will need
to go to www.icontime.com then locate "Product Registration".
Register the program and get the Activation Code. There is a short survey, at the
minimum, provide your name, company, and email. On the next page, you will
find the Activation Code. Copy this down to your Owners Manual - comes with
the CD.
7) Enter the Activation Code in the software, leave the CD in, restart the PC again.
8) Open the program. Select Archive, select Restore.
Find the archive file on your desktop or USB drive, and restore it.
Critical: Tell it to "Append to Existing Data."
Do NOT "Overwrite" or "Replace"anything.
9) Plug the data cable back in to the clock.
10) From the Switchboard, select Time Clock, find your clock, and selecting various
COM ports, make it communicate by clicking TEST.
You can also synchronize your computers time to the clock from this panel.