These proximity badge cards are replacement cards designed specifically for the original Icon RTC1000-C and SB100-Pro badge reader systems. They are intended for use with legacy Icon readers that use the older “C” series card format.

Each card contains an embedded electronic chip and antenna sealed inside the card body. The thin profile has no slot and is designed to be read by proximity only. These cards are commonly used to replace lost or damaged badges or to add new employees to an existing Icon proximity time clock system.

Why Compatibility Matters

Icon produced multiple generations of proximity readers, and the card formats are not interchangeable. Older Icon readers require this specific card type, while newer Icon systems and other brands use different proximity technologies.

Important Compatibility Notes

Designed only for Icon RTC1000-C and SB100-Pro readers
Compatible with legacy readers whose serial numbers begin with “C”
Not compatible with newer Icon systems
Not compatible with other manufacturers’ proximity readers

Typical Uses

Replacing lost or damaged employee badges
Adding employees to an existing Icon proximity system
Maintaining older, legacy time clock installations

Card Specifications

Card Type	Proximity badge (chip + antenna)
Profile	Thin, no slot
Compatible Readers	Icon RTC1000-C, SB100-Pro (C-series)
Other Systems	Not compatible

Need Help Confirming Compatibility?

If you are not sure which proximity card your system uses, check the clock label or serial number prefix. Legacy systems typically begin with the letter “C”.

For additional confirmation, FloridaTimeClock.com provides expert guidance on legacy Icon systems. You can call with your reader model information to ensure you order the correct badge cards for your employee timekeeping setup.