Acroprint Time Clock Replacement Motor
Factory-new motor to restore quiet, accurate operation in Acroprint mechanical time clocks.
Click here for instructions on how to do this
Description:
If your Acroprint time clock has become noisy, is buzzing, or is starting to lose time, the internal motor is usually worn. Replacing the motor restores smooth operation, accurate timekeeping, and helps prevent additional wear on internal gears.
This replacement motor is factory-new and designed specifically for Acroprint mechanical time clocks. Once installed, it brings the clock back to proper speed and reliable minute advancement. The motor is backed by a two-year guarantee.
Important Cam Inspection
When replacing the motor, inspect the attached brass cam. If the cam has a groove worn into it, the cam should be replaced at the same time.
If the cam is worn, the minute overthrow will not travel far enough to grab the next tooth on the minute gear. In this condition, the motor may be running correctly, but the clock will still fail to advance time properly.
If needed, we offer this part as the Acroprint Motor and Cam Combo.
Installation Overview
Replacement can be done in-house by a careful technician. Step-by-step instructions are available to guide the process.
| Skill Level |
Moderate mechanical ability |
| Typical Repair Time |
Allow time and patience |
| Instructions |
Detailed instructions available |
Tools Required
- #2 or #3 Phillips head screwdriver
- #2 flat screwdriver
- Allen wrench set
- Patience
Why Replace the Motor?
- Eliminates buzzing and excessive noise
- Restores accurate minute advancement
- Prevents further wear on gears
- Extends the life of your Acroprint clock
Warranty
This replacement motor includes a two-year guarantee.