Buzzers In A Box 110V – Pyramid 7000 Work Shift Buzzer System

Description

Buzzers In A Box 110V is a complete work shift timer and audible signaling system built around the Pyramid 7000 master clock controller. The system is designed to automate shift changes, breaks, and scheduled alerts using two high-volume 110VAC buzzers. It provides a single timing source for audible signals and can also serve as the foundation for a synchronized clock system when additional clocks are added later.

This starter package includes the Pyramid 7000 timer, two 4-inch high-output buzzers, mounting hardware, and required installation components. Once programmed, the timer activates the buzzers automatically according to the schedule stored in the controller. The Pyramid 7000 supports multiple daily events and distributes consistent timing signals, allowing facilities to maintain reliable shift signaling without manual intervention. The system can also be expanded to support synchronized clocks or additional signaling devices as operational needs grow. :contentReference[oaicite:1]{index=1}

This configuration is typically installed in manufacturing shops, warehouses, service departments, and similar environments where employees may not always be watching a clock. Using a master clock controller keeps signaling consistent across departments and removes timing differences between areas. The included buzzers provide a sharp audible signal that carries well in industrial environments, making it suitable for areas with moderate background noise.

Compatibility and Usage

• Pyramid 7000 master clock and work shift timer
• Includes two 110VAC high-output buzzers
• Programmable scheduled signaling events
• Expandable to synchronized analog or digital clocks
• Stand-alone operation — no software or network required
• Used for shift changes, breaks, and timed alerts

FAQ

Can synchronized clocks be added later?
Yes. The Pyramid 7000 can operate synchronized wall clocks in addition to buzzers.

Is this system difficult to install?
No. The kit includes the required components for standard installations and is designed as a starter system.

Why use buzzers instead of bells?
Buzzers produce a sharper tone that is often easier to hear in industrial environments.

Related Items

• Pyramid 7000 Master Clock Controller
• Pyramid Synchronized Digital Wall Clock
• Pyramid Analog Synchronized Wall Clock
• 24VDC Pyramid Bell
• Additional Industrial Buzzers
• Bell and Buzzer Wire (25 ft / 50 ft / 100 ft / 250 ft)

Clock and Buzzer System grows with you as your business expands!

• Add up to 200 digital or 8 analog clocks
• Add bright amber strobe lights.
• Add more buzzers as you need - additional hardware is required after 6 buzzers.
• 110V is required at each digital and analog clock location.
• They are synchronized by a "BCD" cable from the "7000" master clock.

Call us if you have any questions!

Grows with you as your business expands!

• Add up to 200 digital or 8 analog clocks
• Add more buzzers as you need - additional power supply is required after 4 buzzers.
• Digital clocks: Large 4" red numbers on sharply contrasting black back ground, 5" total height, 110V.
• They are synchronized by a "BCD" cable from the "7000" master clock.

          

Call us if you have any questions!

Buzzers In A Box is a complete solution for your workplace!
Pays for itself IN JUST ONE WEEK:

Example:

You are in manufacturing, you have 10 or more employees.

They drag out break and lunch time by 2 to 3 minutes, every day, two breaks, one lunch a day.  
Worse yet, you have "smokers"
When the lunch ends, someone has to shout "Back to work!"  
Stop the drama, the bell becomes "the bad guy."  Not you or a manager.

Install a simple - or advanced - bell or buzzer system, the bell becomes that "bad guy." 
They won't miss a break, they will take lunch on time, they will start when they should, they will come back, like trained people, when they are supposed to.

Using very conservative numbers, you will gain a minimum of 4 minutes per day per person.
Doesn't sound like much, you would be wrong.

Using extremely conservative numbers, math doesn't lie:
1 employee, $20 per hour WITH taxes and benefits. (You're realling paying about $14 up front, you can't avoid the taxes, PTO, insurances):
That's 34 cents labor cost, one low-pay employee, per minute.  You know this number is low.

Recover 1 minute of break time.  2 minutes of lunch time. 1 more minute of second break.
Not factoring this in: They then work until the END OF DAY with the bell system, not slowing down 10 minutes ahead of time.  That's additional labor expenses you recover..

We can count on 4 minutes absolute minumum time recoverd, per person, per day.  4x .34 = $1.36 per day. 5 days: $6.80 per week. 
52 weeks: $352 per year per employee in recovered labor time.  Every year.

$352 x 10 employees:  $3,520.  Every year.  And the shop becomes more organized.

Add a digital clock so that they all know exactly what time it is, and it gets even better.
 

It's a 3 button setup, takes about 5 minutes.
Just press three buttons to program it, and have your schedule written out and in front of you.
Button one: Enter and Save  
Button two:   Up (numbers and settings)  
Button three:  Down (and settings)

Example:  Monday through Friday, 1/2 day on Saturday, closed on Sunday:

This has been going on for years:  People keep asking "How loud are your bells?"

July 5, 2018 more to know: 
A Fire Station Siren is 116 decibals. Our bells and buzzers are typically 98 to 102.

Unfortunately, it's like describing a dinner at a restaurant. It depends on the environment. 
Is it an empty room like a gymnasium?  Does it have lots of rooms, or lots of background noise like a woodworking shop?  Is this a warehouse with lots of rows of shelving and boxes of fabric?

Bells and buzzers all seem to max out at 102db.  102db is very loud.
110db is extremely loud, check out the YouTube video below. 

In our experience, installing 2 to 3 bells or buzzers is much more effective than just one.   Put one by the timer, then run wire out the another, 50 to 100' away.  It won't be louder, it will just be more likely to be heard above all the background noise.

So, yours truly did some research recently (2016), this is interesting,
Using an Android phone decibel app, this is what we found:

**A bedroom at night in the country, windows closed:  28 - 32 db
**A bedroom at night in the city with the windows closed:  42- 46 db
**Office environment, people chattering:  62db

**American Airlines 737 inside. just behind the wing during takeoff:  86db
**Same jet, landing with the reverse thrusters on:  88db  That ROAR you hear..
**Same jet, cruising for 3 hours, it's 82 to 86db.  That's (partially) why flying is so tiring.
Shop buzzer's:  102db (Edwards, the ones we sell)  Other brands "hum" at 82 to 86.
Our bells test out at 98 to 103db depending on voltage

It seems that no one offers anything louder than 103db, unless it goes on a train, ocean liner, or fog horn.  In some cases loudspeakers are used on farms; we don't have them, but our equipment will ring them.  This is 110db, a train horn on an obnoxious person's pickup truck.  In a working environment, this would clearly cause accidents.

More bells or horns does not make it louder, it just makes it more pervasive - easier to hear through the machinery, across the rooms, over conversations and running equipment like compressors, lifts, packing tape, all that.