Amano TimeGuardian WiFi Proximity
MTX30-A974 WiFi Proximity


WiFI enabled. 100 expandable employee time system. Ethernet and portable USB drive. Built-in reports, prints time sheets, can control paid breaks. Badge, Fob, and PIN Entry.

Retail Price: $597.00
Our Price: $439.00
 
 
WiFi RFID BADGE CLOCK

Accessories & Supplies:

DetailsIDProduct NameDescriptionPriceAdd To Cart
Click 709 Additional EmployeesUpgrade Employee Licenses Here$0.00
Click 673 Additional ManagersUpgrade Managers Here$0.00
Click 115 Surge ProtectorPower surges are not covered w/o surge protection$14.95
Click 563 RFID Key FobRFID KeyFobs Q: 10$45.00
Click 712 RFID CardsRFID Badges Q: 20$56.00
Click 13 24 Card Badge RackSmall Badge Rack$26.00
Click 124 40 Card Badge RackLarge Badge Rack$35.00
Click 469 Technical SupportTGN Annual Software Support$189.00
Click 473 Break & Lunch $$ ControlsTGN-ADVMEAL$200.00
Click 84 Custom Power SupplyBell/Buzzer Power Supply$65.00
Click 233 Manual Ring ButtonRing Button$45.00
Click 88 6" 110V AC Bell 96 > 102dB6" 110V Indoor Bell$89.00
Click 86 4" 120V AC Buzzer 102dB4" 120V Indoor Buzzer$139.00
Click 85 4" 24V AC Buzzer 102db4" 24V AC Buzzer 102db$139.00
Click 578 4" 120V AC Weatherproof Buzzer4" 120V Outdoor Buzzer$239.00
Click 407 Bell Wire25' Insulated bell wire$19.95
Click 404 Bell Wire50' Insulated bell wire$34.95
Click 405 Bell Wire100' Insulated bell wire$44.95
Click 723 WiFi Proximity Terminal (only)Amano MTX30 WiFi Clock$359.00
      

 

Proximity- RFID Card Time Clock System with Ethernet, USB - cable, flash drive, and WiFi

 

Anabi MTX30 Video.jpg         

       ^^ Overview^^                    ^^ Setup and Operation ^^      ^^ Latest YouTube Video  ^^

Time Guardian is an employee time tracking system designed to minimize payroll management. This economical time clock system interfaces with most common payroll applications, including ADP, Paychex, QuickBooks, and .csv. This provides a complete turn-key solution to accurately and effectively mange your payroll. It enables you to automate the collection, calculation, and preparation of employee time records, while increasing your profits.

 

Features and Benefits:

  • WiFi Ready!  Already installed!   FCC LICENSE (this is a link)
  • 100 employees, upgrades to UNLIMITED
  • Two PC network license included, upgrade to as many as you need.
    * Each manager gets a unique ID and unique software authorities
  • Includes :
    20 reusable employee proximity cards (aka "badges")
        RFID Keyfobs are expected - by the end of the year
    Ethernet connection, 6' CAT5 cable
  • Also can communicate via USB thumb drive (USB drive not included)
  • WiFi is built-in.  Use your personal security code to lock-it-down.
  • Automatically updates the punch records - has "autoPoll which is an option on many systems
  • Run from multiple PC's on the same local network
  • Use Multiple Clocks - punch in on one, out on another
  • Able to ring bells and buzzers - integrated work shift timer*
    *
    We specialize in work shift timers and custom modifications
  • No more paper time cards, it's all in your computer, backed up to your server.
  • Typically reduces payroll errors, time calculations are done for you
  • Software wizards guide you through the set up
  • Track and not pay for excessive break time with "Meals" upgrade (see above)
  • Capacity:  100 employees, upgradeable to Unlimited
  • 20 RFID cards are included
  • Supports weekly, bi-weekly, semi-monthly and monthly payperiods
  • Unlimited number of departments
  • Unlimited number of pay polices
  • Unlimited number of holiday assignments (assign in advance)
  • Payroll Exports Include:  Peachtree and Sage 50, ADP, Paychex, QuickBooks, .CSV
  • Simple Scheduling is included
  • Alternative Communication Options:  Use VPN, PortForwarding, and/or DMZ
  • Spot-on accurate: Synchronizes time from your computer (or server)

100 employees (upgradable to 1000), 2 administrators (also upgradable)

  • Includes One Ethernet-ready Terminal, Software, Instructions, 20 Badges
  • Simple Operation:  Waive the badge, it punches you IN and OUT
  • OT can include “Consecutive Day“ if you need it
  • Optional mandatory supervisor approval of
    Overtime, early In-punch, late Out-punch, Unscheduled hours
  • Selectable Display - std time, or military and 100ths
  • Automatic lunch deduction
  • Optional IN Punch Zone Rounding and excessive Paid Break controls*
       *  See "Meals" module, above.  Very powerful feature for controlling
           larger groups of employees, saving you thousands of wage dollars every year.
  • User preset holidays (and who gets paid for them)
  • Accommodates weekly, bi-weekly, semi-monthly and monthly pay periods
  • Unlimited number of departments, pay policies, schedules and holiday assignments
  • Track and report wages, tips and bonuses
  • Fast Plug and play installation wizard
  • Automatic punch updates - data polling - and time synchronization
  • Stores up to 20,000 punch registrations between downloads
  • Automatically backs up every-day, you schedule it.
  • One Year Product Guarantee, 30 days free technical support*
    *Annual support is $189.00 for base system with two user license

Click here to download the 14 day demo software

Click here to see a list of ALL Time Guardian Modules

Updates to MTX-30 and new AFR clocks.. 

TimeGuardian 6.0 will work on Server 2012 and newer! (factory brochure says 2016)  
You can continue to use your older clocks with this software, and the newer ones.

Holds punches when the network is off.
The clock will hold the punch records in the clock until a positive connection is made to the connected computer.  If the network is down, they will still work normally and capture the punches.

Work Shift Bells - if you have that set up: The bell system plug is the same, just replace the clock and the connections.

Lastly, all pre-purchased modules will transfer over to the new software, and employee records all transfer across to the new software. You should call Amano when you are ready to install this, to do it right, with the least amount of effort.

FCC LICENSE - click to download: 

In the box:

MTX-30 Factory Fresh Proximity card time clock terminal with mounting plate
Power supply, CAT5 cable, WiFi communications
20 reusable RFID employee badges, TimeGuardian software on USB drive
Quick-start manual.  Wall mounting hardware.

Capacity:                  20,000 employee time card memory
Transactions:            20,000 transactions (punches between downloads)
Communications:    50' USB (15M), TCP/IP, USB thumb drive, WiFi
Power:                     100-240V AC, 50/60Hz
                                Output:  Power Supply:  12V DC, 1.5A
Environment:         Operating Temp:  32 - 105 F (0-45 C)
                               Operating Humidity:  20% to 80%
Dimensions:           Height:  5.5"  Width: 6.5"  Depth:  1.8"
Memory Backup:   Provides up to 3 year of continuous memory without AC power
Display:                  Large 3 inch TFT LCD color screen
Keypad:                  3x2 keypad with 4 a the clock function keys
Clock:                     Quartz Oscillator, accuracy within .03 seconds per week
                              at normal temperature

Download Reports - in PDF:

TimeGuardian Department Report                     Employee Hour History
                                               
Employee Personal Information                       Time Card Detail Report

                                               

All Amano MTX-30 system clocks can ring bells.

Amano Bell Scheduling Module is included with TimeGuardian Software

Used in manufacturing, schools, and farming.
You need to add our custom power supply and bells or buzzers.
Call us if you have any questions.  We are a full-service company.

                                1 800 682 - 3389

Amano MTX-30 information you will not find anywhere else

Hardware:  The Proximity reader has a capacity of 2000 employees per machine.
                   20,000 punches between downloads.
                   Each terminal can enroll 2000 employees  But when you get above 50 people,
                   you start to have lines of people being paid to stand still.
                   That's when you should consider adding more clock terminals.
                   Download punches to USB thumb drive (not included) for ultimate portablility                           
Employees can be assigned to multiple clock terminals.*
                   *  Punch IN at one location, OUT at another, as needed,

TimeGuardian Software.  Adding additional managers:
All TimeGuardian systems come with two managers, aka two "system administrators."
When you upgrade to 5 (the first upgrade, which is a TOTAL of 5) users/administrators, you get the ability to assign unique usernames and passwords to the manager, and also assign what they can - and cannot - do. 

For example, you would not want the Parts Manager to have the ability to change the punches for people in the Administrative department, or to change the pay cycle.  But you might want him to be able to correct punches for employees in the Parts department. On the other hand, the payroll manager would have access to everything., and the company owner might only have access to making and reading reports.

TimeGuardian Software.  Adding additional employees:
TimeGuardian starts with 100 employees.  If you purchase + 25 employees, you then have a license for 125 ACTIVE employees.  If you purchase a 250 employee upgrade, you then have a license for 350 ACTIVE employees. Employees can be inactivated and brought back, next season.

TimeGuardian Technical Support:
If you go above 2, support increases by $50
If you go above 5, support increases by $100
If you go above 10, support increases by $250

HOW MANY TIME CLOCKS DO I NEED, - AND WHY?
In this industry, where a few of us have over 25 years of direct experience, the rule of thumb is this: 
If you have over 50 employees, it's inexpensive and smart to add a second time clock.  If a clock goes down, you can always have them use the other one until it's repaired or replaced.  You also save money by not having people stand in lines to punch in and out.

Cick HERE to see all the optional upgrades, including Paid Breaks.

Upgrade "Advanced Meals" controls, among other things, Paid Breaks.

If employees are taking too long, like 12 to 15 minutes on paid breaks, you don't have to pay them.
Click here to see it:  Paid Breaks, aka TGN-ADVMEAL

How it works: 
When an employee stops work for their paid break, they press F1 on the display,
then waive their badge (or keyfob).When they come back, they simply waive their badge again.

You can set the length of the paid break.  In this example, 10 minutes, twice a day.  
    10 x 2 x 5 days in a week, 100 minutes paid break.
    Lets say they take 12 and 10 on Monday.  That's 22, when it should be 20. 
    Tuesday:  8 and 10.  Wednesday 12 and 15.
    Thursday: 13 and 11.  Friday 9 and 15. 
Add it up.  112 minutes.  They are paid for 100, that's the deal.
TimeGuardian ADVMEAL docks them 12 minutes. $5.00/week, saved.

Imagine you have only 10 employees, you save 10 minutes each
per week for excessive break time.  It's all on paper.
You pay them $25 per hour with taxes, etc. 
Each minute costs you 41cents, per person at $25 per hour.
10 minutes a day recovered, $4.50 every day.  1 week: 22.50 per employee. 
Savings:  $225. per week for just 10 employees, and it goes on for years.
It's easy to justify the cost of this module.